Serving the Greater Philadelphia Area
    Pushback Rack system inside a Pennsylvania warehouse
    Norristown, Pennsylvania

    Pushback Rack in Norristown

    Pushback rack in Norristown gives repeat pallet stock a deeper reserve without making every position an aisle face. Parts distributors near US 202 and Ridge Pike can group matching loads behind one opening, provided ordinary quantities per SKU justify that depth rather than merely filling it after a large receipt.

    For light manufacturing around Main Street and the Schuylkill corridor, older buildings make interior measurements important. Columns, low overhead obstructions and the forklift turning envelope can limit row placement. Keep working parts in accessible locations while assigning repeat production supplies to deeper lanes with a defined withdrawal sequence.

    (215) 445-1559

    How push back racking advances the remaining loads

    Select the operating pattern before assigning pallet positions on the drawing.

    1

    Confirm the load population

    Count typical pallets for each SKU and note package overhang, pallet construction and maximum loaded height. Specify two to six pallet positions deep only where the selected system supports that depth; available arrangements are system-dependent.

    2

    Understand the moving assembly

    Nested carts on inclined rails carry successive pallets. The incoming pallet pushes earlier pallets rearward during loading, so each lane needs compatible loads and enough repeat stock to make its assigned depth useful.

    3

    Control the front withdrawal

    During controlled forklift withdrawal of the front pallet, gravity lets the remaining pallets move forward. This is explicitly LIFO, or last in, first out; do not assign date-sensitive stock on the assumption that the oldest pallet leaves first.

    4

    Check the whole rack configuration

    Size beams and frames for actual pallet weights, beam spans and rack height. Review existing-rack compatibility before considering integration, including connections and cart support requirements; never assume the assembly is a bolt-in addition to an existing bay.

    Why pushback rack begins with everyday parts quantities

    A pushback pallet rack uses fewer aisles than comparable single-deep rows, but the gain depends on usable lane occupancy. Review ordinary pallets per SKU, not only peak inventory. A five-position lane holding two pallets most weeks can surrender space that several shorter lanes would keep available to other part numbers.

    Philadelphia Pallet Rack is a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997 for operations that need storage matched to actual stock. We specify new material only, with pallet dimensions, load distribution and the proposed handling method recorded before choosing component quantities.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    High-density pushback rack lanes loaded with pallets
    Pushback pallet racking showing cart rails and load beams

    Reserve lanes beside active parts picking

    In a Ridge Pike parts operation, keep broken-case picking separate from full-pallet reserves. A Schuylkill-area manufacturing building may also need short lanes where columns interrupt a row, rather than one uniform depth across the entire room.

    Light Manufacturing
    Wholesale Distribution
    Medical Supply
    E-Commerce Fulfillment
    Printing & Packaging
    Automotive Parts

    Pushback rack scope with an installation sequence

    Our proposal separates lane depth, pallet positions and component quantities so a capacity figure can be checked against the stock list. Selective rack provides direct access to each pallet; retain it for scattered part numbers. Drive-in storage instead involves truck entry, with the truck running on the floor, not on pallet-support rails.

    For this installation, experienced installation crews we schedule and manage work through agreed row releases while the operating team retains its designated stock access. Confirm a material staging area and an unobstructed handling route before assembly begins. The handoff identifies lane assignments and the capacity information for the supplied configuration.

    Use Norristown storage options to compare local storage choices, then examine pushback rack systems for the system overview. Evaluate Norristown pallet flow rack where first-in rotation matters, or Norristown drive-in rack when larger same-product groups warrant truck-entry storage. Those comparisons should change the layout where needed, not just add alternatives to a quotation.

    Repeat production supplies with stable pallet counts
    Parts reserves behind a separate picking area
    Matching pallets grouped by a single SKU
    Buildings where fewer aisles release usable space
    Call (215) 445-1559

    Warehouse Racking Examples

    Pallet Rack warehouse storage system
    Pallet Rack
    Pushback Rack warehouse storage system
    Pushback Rack
    Pallet Flow Rack warehouse storage system
    Pallet Flow Rack
    Drive-In Rack warehouse storage system
    Drive-In Rack
    Cantilever Rack warehouse storage system
    Cantilever Rack
    Carton Flow Rack warehouse storage system
    Carton Flow Rack

    Price a measured Norristown reserve layout

    Send a stock-by-SKU count, loaded pallet measurements and a marked building sketch. Include forklift details and the reserve quantities that must remain accessible during installation.

    Philadelphia Pallet Rack

    7201 Frankford Ave.

    Unit #3151

    Philadelphia, PA 19135

    (215) 445-1559

    Monday - Friday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Questions about pushback rack planning

    Nearby Areas We Also Serve

    Norristown projects start with the receiving building and its daily stock movements, including transfers between separate reserve and picking areas.

    Where We Work

    Located in Philadelphia, we serve the entire Greater Philadelphia region with industrial pallet racks and warehouse storage solutions.

    Philadelphia Pallet Rack

    Address

    7201 Frankford Ave.
    Unit #3151
    Philadelphia, PA 19135

    Business Hours

    Monday - Friday: 8:00 AM - 6:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Pushback Rack in Norristown?

    Ask for a lane plan that explains both the position count and the access tradeoff.

    (215) 445-1559
    Tap to Call