Serving the Greater Philadelphia Area
    Cantilever Rack system inside a Pennsylvania warehouse
    Exton, Pennsylvania

    Cantilever Rack in Exton

    Cantilever rack in Exton should connect long-material receiving with the manufacturing tasks that consume it. Arms mounted on uprights provide an open front for tube, bar and profiles, without front columns dividing the loading face into pallet-width openings. That arrangement supports lengthwise access when the material dimensions and truck approach are established together.

    A manufacturing stock list may include complete bundles, individual sections and pieces returned after a job. We distinguish those forms before selecting support spacing. The longest receipt determines part of the handling envelope, but the shortest retained section can determine the maximum distance between bearing points. Planning only from the largest bundle misses that difference.

    (215) 445-1559

    Cantilever storage rack planning for mixed supplies

    Our Exton warehouse planning review considers the whole material route; cantilever storage rack options then defines the arms and upright groups serving the long-stock portion. Include pallet receiving and any production return area on the same drawing so their circulation remains apparent.

    Compare FIFO pallet lanes for high-volume dated pallet stock requiring FIFO rotation. Where few stock lines occupy many bulk pallet positions, bulk pallet storage may fit a separate reserve block. Neither comparison replaces the support analysis for loose bar or tube.

    The agreed scope covers new material, layout and experienced installation crews we schedule and manage. Rows are braced and anchored to the floor. Review the load group labels with operations, and keep the design assumptions available when a supplier changes packet depth or a production team retains shorter pieces.

    Bar bundles linked to manufacturing jobs
    Tube families with measured bearing points
    Profiles returned after partial consumption
    Mixed floors with separate pallet handling
    Call (215) 445-1559

    Why cantilever racking begins with production returns

    We review arm length and arm capacity separately. Projection must suit the packet depth; capacity must suit the weight distribution and intended placement. The upright and base arrangement also needs to carry the proposed combination of levels. Increasing the number of arms is not a substitute for checking the assembled system against its assigned stock.

    As a division of Warehouse Equipment & Supplies Co., we draw on supplying and installing work since 1997. We use the stock schedule to compare open-front supports with selective pallet bays, explaining where each belongs. Your CAD layout shows operating space, not merely steel positions, and the quote identifies the material groups behind the proposed arrangement.

    Free warehouse consultation
    CAD layout with position counts
    Installation by trusted installation partners
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    US 30 receiving and PA 100 transfers

    Manufacturing and life-science supply connected through US 30 and PA 100 can combine palletized supplies with long production materials. Around Eagleview, that mix calls for defined transfers between receiving, storage and the point of use. Keep the long-load handling envelope separate from pallet staging; a shared aisle must accommodate the material being carried, not just the truck width.

    Life Sciences
    Distribution & 3PL
    Technology Hardware
    Consumer Products
    Medical Devices
    Wholesale Supply

    How cantilever rack matches material movement

    The support schedule follows four decisions about actual stock movement.

    1

    Map production consumption

    Identify which stock leaves as a full bundle and which is picked into smaller quantities. Include retained lengths and the route to the next task.

    2

    Set longitudinal supports

    Use the minimum and maximum lengths and material stiffness to determine upright spacing. Check load depth and permissible overhang at the same time.

    3

    Confirm the lifting method

    Record forklift or side-loader dimensions, fork engagement and lift height. Review removal from upper levels as well as floor-level placement.

    4

    Choose location and finish

    Compare indoor boundary runs with internal double-sided rows. If any material will be stored outdoors, assess exposure separately before selecting components and finish.

    Warehouse Racking Examples

    Pallet Rack warehouse storage system
    Pallet Rack
    Pushback Rack warehouse storage system
    Pushback Rack
    Pallet Flow Rack warehouse storage system
    Pallet Flow Rack
    Drive-In Rack warehouse storage system
    Drive-In Rack
    Cantilever Rack warehouse storage system
    Cantilever Rack
    Carton Flow Rack warehouse storage system
    Carton Flow Rack

    Build the quote around the production list

    Send a production material list with packet dimensions, weight ranges and retained lengths. Add clear heights, floor dimensions and the handling equipment used between storage and production. An itemized quote should identify the load assumptions; lead time is confirmed on your quote.

    Philadelphia Pallet Rack

    7201 Frankford Ave.

    Unit #3151

    Philadelphia, PA 19135

    (215) 445-1559

    Monday - Friday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Exton long-load buying questions

    Nearby Areas We Also Serve

    For another Chester County operation, compare production transfer paths before adopting the same upright spacing and arm level schedule.

    Where We Work

    Located in Philadelphia, we serve the entire Greater Philadelphia region with industrial pallet racks and warehouse storage solutions.

    Philadelphia Pallet Rack

    Address

    7201 Frankford Ave.
    Unit #3151
    Philadelphia, PA 19135

    Business Hours

    Monday - Friday: 8:00 AM - 6:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Cantilever Rack in Exton?

    Review production stock measurements and the lifting route at (215) 445-1559.

    (215) 445-1559
    Tap to Call